GripEdge | Ultimate Heavy Duty Impact Bundle

Buy 2, Get 1 Free: The Heavy-Duty G-FORS™ and RPT™ Impact Bundle

Large fasteners fail under large loads. A seized lug nut or suspension bolt rounds its external flats under impact, and a large internal hex fastener rounds its broach the same way, leaving a standard socket or bit with no flat surface to drive against. This bundle covers both failure modes at heavy-duty scale. Pair the MXC13DS 13-Pc G-FORS™ 1/2" Drive Deep Metric & SAE Master Socket Extractor Set with the IHDM5S 5-Pc 3/4" Drive Impact Metric RPT™ Hex Bit Socket Set, and the IHDS5S 5-Pc 3/4" Drive Impact SAE RPT™ Hex Bit Socket Set ships free. Together they handle damaged external and internal hex fasteners in both metric and SAE, all impact rated.

What's in the bundle

• MXC13DS: 13-Pc G-FORS™ 1/2" Drive Deep Metric & SAE Master Socket Extractor Set. Metric 19, 20, 21, 22, 23, 24, and 25mm plus SAE 3/4", 13/16", 7/8", 15/16", and 1". Deep, impact-rated extractors for rounded lug nuts, seized suspension hardware, and large external hex fasteners, in one portable case built for service trucks and mobile work.
• IHDM5S: 5-Pc 3/4" Drive Impact Metric RPT™ Hex Bit Socket Set. Sizes 14, 17, 19, 22, and 24mm. Impact-rated 3/4" drive hex bits for large metric socket head fasteners in driveline, axle, and heavy equipment applications.
• IHDS5S: 5-Pc 3/4" Drive Impact SAE RPT™ Hex Bit Socket Set (FREE). Sizes 9/16", 5/8", 3/4", 7/8", and 1". The SAE counterpart for domestic trucks, agricultural equipment, and industrial machinery.

The engineering behind the grip

• G-FORS™ straight-cut extraction geometry. Tapered extractors contact a rounded fastener at a narrow band and wedge material outward. The G-FORS™ bore is cut straight, so its grooves make full-length contact along the fastener sidewall and pull material inward as torque rises. The deep barrel passes over protruding studs and extended threads to engage the full height of the fastener, delivering purchase on heads rounded up to 100%.
• Integrated G-FORS™ pusher rod. Thread the pusher rod through the rear of the extractor and the removed fastener drives straight out. No bench vice, no hammer and punch, no damage to the socket's internal geometry.
• RPT™ tooth geometry that loads inward. A standard hex bit concentrates stress on the fastener corners and pushes material outward until the broach rounds. The RPT™ profile relocates the contact point along the flank and directs force inward, forming a mechanical lock. Torque transfers into the fastener rather than around it, yielding up to 50% more torque on undamaged fasteners and up to 400% more on damaged ones.
• Bi-directional engagement across all three sets. Both profiles grip in either rotational direction, so a seized fastener can be worked back and forth to break the corrosion bond, and a damaged fastener can be reinstalled temporarily when a replacement is not on hand.
• Built for impact. Every socket in the bundle is machined from Cr-Mo steel for the strength and fatigue resistance required under repeated impact loading, with corrosion-resistant coatings and oversized laser-etched size markings for legibility in the field.